Solid Dancefloor Tiles are a solid interlocking modular tile that features a lightly-textured top design. Made of Polypropylene, these tiles are durable and easy to set up for dances and events. Solid Dancefloor Tiles are appealing to the eye, easy to clean, comfortable for dancers and will last for years.
While priced by the square foot, keep in mind that Solid Dancefloor Tiles are produced at a slightly larger measurement: 13″ length x 13″ width a 0.50″ height.
Note: It is not recommended that the mat be placed under heavy objects or driven on.
Size: 13″ x 13″ x 0.50″ Height
Non-slip when wet
High Rollover Strength
Resistant to Most Chemicals
PP and Polydyne Material
UV Stabilizer Built into Material with 7 Year Warranty
Temperature Resistance: -28°F to 248°F
Standard Test: DIN 18032, NFSI, WGEG
Putting together Solid Dancefloor Tiles is very simple and typically done by the consumer.
Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris.
You will interlock your tiles starting from one corner and moving to your right. After laying your first three tiles, you will then move to the second row and begin interlocking from left to right until complete.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
Maintenance of interlocking tile floors are simple. Either use a shop vac to pick up any debris that rests on the surface of the tile, gently mop, or complete a light pressure wash.