The Ribbed Fitness Pad features our Ribbed Drain Flooring Tiles, which come from our specially manufactured Rubbertrax eco-friendly product line. Rubbertrax contains 100% post-consumer recycled content and is the only modular rubber tile in the world using 100% post-consumer recycled material.
The Ribbed Fitness Pad is non-slip when wet while its open-profile tile design allows for easy cleaning as liquids and small debris easily fall through, keeping a clean top surface. The tile composition of flexible rubber provides a durable workout surface that is easier on the joints.
This Ribbed Fitness Pad measures 9′ x 9′, covering 84 sq. ft.
Note: It is not recommended that the mat be placed under heavy objects.
Fitness Pad Size: 9′ x 9′
Square Feet: 84 Sq. Ft.
Tiles Included: 49 tiles
Material: Recycled Rubber and Plastics
Stapled together with patented clip system.
Chemical Resistance: Most automotive chemicals
Tile Weight: 32 oz.
Temperature Tolerances: -28F to 248F
Tensile Strength: 1555 psi
Warranty: 7 years
Standard Test DIN 18032, NFSI, WGEG
Putting together the Ribbed Fitness Pad is very simple and typically done by the consumer.
Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris. You will interlock your tiles starting from one corner and moving to your right. After laying your first row of tiles (depending on how wide you want your pad to be), you will then move to the second row and begin interlocking from left to right until complete.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
Maintenance of interlocking tile floors are simple. Either use a shop vac to pick up any debris that rests on the surface of the tile, gently mop, or complete a light pressure wash.