The Ribbed Drainage Tiles Car Pad features our Ribbed Drain Flooring Tiles which are made from 100% post-consumer recycled content. Featuring a functional and appealing open-profile design, Ribbed Drain Tiles will showcase any vehicle in style in showrooms, garages or car display areas at shows.
Maintaining a Ribbed Drainage Tiles Car Pad is simple as small debris and liquids fall through the tile’s open-profile design, keeping the top surface clear of an abundance of particles. Made with UV stabilizers, the car pads can be used outdoors and will not fade in direct sunlight for years.
This Ribbed Drainage Tiles Single Car Pad Kit only comes with tiles (no edges or corners). It measures 17.5′ long x 8′ wide, covering 134 sq. ft.
For the Ribbed Drainage Tiles Single Car Pad Kit that comes complete with edges and corners, click here.
Car Pad Dimensions: 17.5′ x 8′
Tiles: 13 x 6 tiles
Total Package Includes: 78 tiles (NO Edges, NO Corners)
Square Footage: 134 Sq. Ft.
Ribbed Drain Flooring Tiles:
Size: 15.75″ x 15.75″, Height: 0.75″
Contains 100% post-consumer recycled content
Non-slip when wet
High Rollover Strength
Made from Recycled Rubber and Plastics
Resistant to Most Chemicals
PP and Polydyne Material
UV Stabilizer Built into Material with 7 Year Warranty
Temperature Resistance: -28°F to 248°F
Standard Test: DIN 18032, NFSI, WGEG
Putting together the Ribbed Drain Tiles Single Car Pad is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris.
You will interlock your tiles starting from one corner and moving to your right. After laying your first seven tiles, you will then move to the second row and begin interlocking from left to right until complete.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
Maintenance of interlocking tile floors are simple. Either use a shop vac to pick up any debris that rests on the surface of the tile, gently mop, or complete a light pressure wash.