The Ribbed Drain Tiles Completer Pack allows you to add more flooring, 12 sq. ft. at a time, to your existing Ribbed Drain Flooring Tiles. These modular interlocking tiles allow you to build out in different formations. The Completer Pack includes 7 Ribbed Drain Tiles and 15 edges.
Ribbed Drain Flooring Tiles are a part of the Rubbertrax line of recycled rubber flooring tiles. It’s about sustainability and Rubbertrax is our continued effort in providing a LEED Certified product that is both functional and durable. Rubbertrax tiles contain 100% post-consumer recycled content and is the only modular rubber tile in the world using 100% post-consumer recycled material. These tiles have a softer feel than traditional plastic tiles and enhances upon the elements of anti-fatigue and comfort.
The Ribbed Drain Flooring Tiles are appealing to the eye, easy to clean and will last for years. The soft, flexible anti-fatigue tiles provide cushioning for people who tend to stand for long periods of time. These areas include work shops, garages, commercial spaces, events and trade shows.
The Ribbed Drain Flooring Tiles are non-slip when wet while its open-profile tile design allows for easy cleaning as liquids and small debris easily fall through, keeping a clean top surface. While sold by the square foot, keep in mind that Rubbertrax recycled rubber flooring tiles are produced at a slightly larger measurement: 15.75″ length x 15.75″ width a 0.75″ height.
Note: It is not recommended that the mat be placed under heavy objects or driven on.
Tile Dimensions: 15.75″ x 15.75″ x 0.75″
Tiles Included: 7 tiles
Edges Included: 15 edges
Square Footage: 12 Sq. Ft.
Contains 100% post-consumer recycled content
Non-slip when wet
High Rollover Strength
Made from Recycled Rubber and Plastics
Resistant to Most Chemicals
PP and Polydyne Material
UV Stabilizer Built into Material with 7 Year Warranty
Temperature Resistance: -28°F to 248°F
Standard Test: DIN 18032, NFSI, WGEG
Installation of interlocking tiles is very simple and typically done by the consumer. This Completer Pack is meant to add on to your existing Ribbed Drain Tiles flooring.
Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris.
Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
Maintenance of interlocking tile floors are simple. Either use a shop vac to pick up an debris that has fallen through the top of the tile, gently mop, or complete a light pressure wash.
The Ribbed Ribbed Tiles Completer Pack comes complete with your choice of color for edges.
Please refer to the Color Chart below to aid in your selection: