Sale!
CTRR0100 Coin Pattern Rubber Floor Tiles Rubbertrax - One Mission Direct

Coin Pattern Flooring Tiles

$3.95 $2.87 sq. ft.

Coin Pattern Flooring Tiles

$3.95 $2.87 sq. ft.

Items Sold: 2

 

13″ x 13″ tiles. Sold in boxes of 34 tiles (covers 40 sq. ft.). Enter the required area below.

The calculated “Actual Area” measurement indicates the square footage of the nearest full box to cover the area. The “Add to Cart” quantity reflects the number of boxes needed in order to cover the indicated area.

 

Actual Area (sq. ft.)40
Total Price$114.80
Compare

Product Details

Coin Pattern Flooring Tiles are a part of the Rubbertrax line of recycled rubber flooring tiles. It’s about sustainability and Rubbertrax is our continued effort in providing a LEED Certified product that is both functional and durable. Rubbertrax tiles contain 100% post-consumer recycled content and is the only modular rubber tile in the world using 100% post-consumer recycled material. These tiles have a softer feel than traditional plastic tiles and enhances upon the elements of anti-fatigue and comfort.

Coin Pattern Flooring Tiles are appealing to the eye, easy to clean and will last for years. A solid surface tile that features a slightly raised circular “coin” pattern, the soft, flexible anti-fatigue tiles provide cushioning for people who tend to stand for long periods of time. These areas include work shops, garages, commercial spaces, events and trade shows.

While priced by the square foot, keep in mind that Coin Pattern Flooring Tiles are produced at a slightly larger measurement: 13″ length x 13″ width a 0.50″ height.

Note: It is not recommended that the mat be placed under heavy objects or driven on.

 

 
Size: 13″ x 13″, Height: 0.50″

Contains 100% post-consumer recycled content

Non-slip when wet

High Rollover Strength

Made from Recycled Rubber and Plastics

Resistant to Most Chemicals

PP and Polydyne Material

UV Stabilizer Built into Material with 7 Year Warranty

Temperature Resistance: -28°F to 248°F

Standard Test: DIN 18032, NFSI, WGEG
 

 
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris.
Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.

When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.

Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
 

 
Maintenance of interlocking tile floors are simple. Either use a shop vac to pick up any debris that rests on the surface of the tile, gently mop, or complete a light pressure wash.
 
 
 
 

Weight 42 lbs
Dimensions 13.75 x 13.75 x 18.5 in