Sale!
WMRR0100 Rubbertrax Anti-Fatigue Work Mat - One Mission Direct

Anti-Fatigue / Work Mat

$69.95 $49.95

Anti-Fatigue / Work Mat

$69.95 $49.95

Items Sold: 0

Edges *

The Anti-Fatigue / Work Mat comes with 7 edges, please select a color.

Corners *

The Anti-Fatigue / Work Mat comes with 2 corner pieces, please select a color.

Compare

Description

The Anti-Fatigue / Work Mat features specially eco-friendly manufactured tiles called Rubbertrax – a LEED Certified product line. Rubbertrax tiles contain 100% post-consumer recycled content and is the only modular rubber tile in the world using 100% post-consumer recycled material.

The soft, flexible anti-fatigue tiles provide cushioning for people who tend to stand for long periods of time – whether it be in work shops, garages and around work bench areas, commercial offices in front or behind the counter, or events and trade shows.

The Anti-Fatigue / Work Mat features the Rubbertrax Ribbed Drain Flooring Tile which is non-slip when wet while its open-profile tile design allows for easy cleaning as liquids and small debris easily fall through, keeping a clean top surface.

This work mat measures approximately 3′ x 4′ and comes complete with Rubbertrax black tiles, edges and corners (choice of 16 colors).

Note: It is not recommended that the mat be placed under heavy objects or driven on.

 

Approximate Size: 52″ x 34″

Material: Recycled Rubber and Plastics Available in black with 16 color options for edges and corners.

Chemical Resistance: Most automotive chemicals

Alkalis: Excellent

Acids/Solvents: Good

Tile Weight: 32 oz.

Slide: Non-slip

Temperature Tolerances: -28F to 248F

Tensile Strength: 1555 psi

Warranty: 7 years

Standard Test: DIN 18032, NFSI, WGEG

 

Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
First, clean your sub floor so it is free of all dirt, grease or debris.
Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.

When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.

Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.

 

 

 

Maintenance of interlocking tile floors are simple. Either use a shop vac to pick up an debris that has fallen through the top of the tile, gently mop, or complete a light pressure wash.

 

 

 

 

 

The Anti-Fatigue / Work Mat comes with your choice of color for both Edges and Corners. Refer to the chart below:

Ribbed Tile Edges Color Chart - One Mission Direct
Weight 13 lbs
Dimensions 52 x 34 x .75 in